The Standard Issue PFD has been the preferred PFD of professionals for 12 years. We have re-introduced it with some important new additions based on years of feed back from the field.
Built with two lower pockets, quick release blow-out belt rated to 1200 lb, we have added multiple attachment points for radio, knife, lights, reflective tape, team ID panels, removable back pocket lanyard attachment in each pocket & multiple Velcro attachment points. With the added accessories and secure, form fitting design, it sets new standards in PFD design and function for professional users in and around swift water and high speed motorized craft.

NW Pro System PFD Floatation lbs

NW Pro System PFD - XSmall - 20
NW Pro System PFD - Small - 22
NW Pro System PFD - Medium - 23
NW Pro System PFD - Large - 25
NW Pro System PFD - XLarge - 30
NW Pro System PFD - XXLarge - 32
NW Pro System PFD - XXXLarge - 34

Enforcement Teams:
For enforcement teams using duty belts and body armor we make the Pro System 30 series equipped with 30+ pounds of flotation.

NW Pro System 30+ Floatation lbs.

NW Pro System 30 PFD - Small - 30
NW Pro System 30 PFD - Medium - 30
NW Pro System 30 PFD - Large - 32
NW Pro System PFD - XLarge - 30
NW Pro System PFD - XXLarge - 32
NW Pro System PFD - XXXLarge - 34

Form-Flow® Back Pocket – removable*:
This pocket attaches to the back of the PFD with our unique Form-Flow® attachment system. All edges are protected to eliminate snagging on branches, rebar and other debris. The sides are expandable mesh to expedite water drainage and increase volume. Internal lanyard attachment point ensures what you need is where you need it, when you need it.
Dimension: 10.5” x 7” x 1.5”
20RES-40

Detachable Upper Pocket - each (specify left or right)*:
These pockets are form fitted using stretch mesh to drain water and accommodate increased capacity while maintain a low profile. The double zipper slider allows partial opening for antennas and lanyards. Padding protects contents and fabric against blunt trauma, while providing inherent flotation. These pockets can be added or remove in field operations as required. Great for communication gear, GPS units, etc.
Dimension: 4.5” x 6.5” x 1”
20RES-40c

Quick Release Belt:
Positioned on the PFD to ensure safe in-water body orientation when attached to an external line. In conjunction with the Extrication Line, the 2” nylon webbing Quick Release Belt with parrel bead enables a strong swimmer or tagged rescuer to safely release themselves or the swimmer, if required. The standard PFD comes with belt attached.
15TL-05b

Extrication Line:
Upgraded with a NEW chest attachment system. This tubular webbing contact system attaches to the Quick Release Belt at the back of your PFD by a stainless steel d-ring and adjustable ladder lock. The activation point mounts on the chest area to enable an entrapped person to assist a rescuer in their own extrication. This safe low profile design will release automatically from any direction under specific load conditions. It can be reached with either hand and remains accessible during a lower body pin. The keyhole carabiner will not snag while engaging or disengaging, thereby reducing risk and time during the rescue.
15TL-05d

Team ID Panels - Front & Back Solas® Reflective:
Certified Solas™ marine grade highly reflective customizable team identification badges. Mounted front and back and secured with Velcro for easy removal during undercover &/or night operations. If you work for different emergency teams simply change badges call to call. SAR, Fire, Police etc.
Custom lettering available. Set of 2 - Front: 2” x 2”, Back: 3” x 9”.
20RES-41

Reflective Strips – Set of 8, removable:
Flexibility to add or reduce your visual presence. Eight highly reflective strips attach to key contact points for non-permanent adhesion.
20RES-41a

Chest Expander – 2.5” Girth Widener*:
Proper fit being of primary importance, the Chest Expander allows the PFD to fit in the event of additional thermal/ballistic protection and user weight gain. This allows long term near-unlimited fit range for any user regardless of build. We can build these parallel or tapered to fit broadened chests or abdomens as required.
20RES-43

Quick Draw Deployment Straps - pair:
Colour-coded for visual reference, these quick-release straps allow the attachment of a zippered Gear Pouch (wrap-kit) and Throw Bag to mount the PFD without the need of a waist belt. Flexible to accommodate any combination of 1 or 2 throw bags per side or gear pouch on each side. Removable when not in use.
20RES-42

EDS Gear Pouch*:
Built for pulleys, prussics, anchors, or other gear your calls may require. The zippered Emergency Deployment System Gear Pouch is contoured for a low profile and uses 3 belt loops to ensure a snug fit against your body. The pouch attaches near the users waist at the base of the PFD with a Quick Draw Deployment Strap for instant access.
05RB-45

Quick Draw Wedge Throw Bag*:
Our Standard Wedge Throw Bag is built with three belt loops to attach it to the base of the PFD and provide instant access by utilizing the colour-coded Quick Draw Deployment Strap. The system is built to accommodate 1 or 2 throw bags per side or 1 gear pouch per side on the users left or right.
Quick Draw Wedge Throw Bag Small 70' x 1/4'' Poly 10TB-30a
Quick Draw Wedge Throw Bag Small 60' x 1/4'' Spec 10TB-30aa

Emergency Scissor/Knife Holder*:
This holster is designed to attach vertically or horizontally to your NW PFD, using the existing straps. It can also be attached to any standard belt.
20RES-45

Black Ops Color Option:
An all black version to reduced visibility for enforcement teams where stealth is required during undercover & / or night operations. When visibility is an asset simply add a set of Reflective Strips and your Team Identification Panels.
20RES-43